山東標牌制作廠講形態各異的廣告標牌隨處可見,但是大家對于廣告標牌的制作工藝了解有多少呢?下面,我們一起學習一下吧!

Shandong Signboard Manufacturing Factory says that different forms of billboards can be seen everywhere, but how much do you know about the production process of billboards? Next, let's learn together!

1、烤漆工藝要求

1. Process Requirements of Baking Paint

1)清洗表面殘留物,補灰,打磨等一系列表面處理.

1) A series of surface treatments, such as cleaning surface residues, ash filling, grinding and so on.

2)采用環保型優質油漆烤漆處理.烤漆房須無塵埃顆粒車間,烤漆表面涂層三涂三烤處理.

2) Use environmentally friendly high-quality paint baking process. The baking room should be dust-free particle workshop, three coatings and three baking treatments on the surface of the baking paint.

3) 油漆色彩要符合設計方案要求.

3) Paint color should meet the design requirements.

4) 面漆膜應平滑、均勻,不允許出現流痕、皺紋、桔皮、氣泡、夾雜等影響裝飾效果的缺陷.

4) the finish film shall be smooth and uniform, and no defects such as flow marks, wrinkles, orange peel, bubbles, inclusions, etc. that affect the decoration effect are allowed.

2、鋁合金型材要求

2. Requirements for Aluminum Alloy Profiles

1)鋁合金型材和常用塑膠材料配件應符合鋁合金標牌型材的質量要求.

1) Aluminum alloy profiles and common plastic material accessories shall meet the quality requirements of aluminium alloy brand profiles.

2)鋁合金型材的角底偏差少于正負偏差1度.

2) The angle-bottom deviation of aluminium alloy profile is less than 1 degree of positive and negative deviation.

3)平面間隙<=0.4%*B.

3) Planar clearance <=0.4%*B.

3、不銹鋼工藝要求

3. Stainless steel process requirements

1)不銹鋼板須刨坑折彎焊接.

1) Stainless steel sheets shall be welded by bending and shaving pits.

2)焊接前清除表面油污,減少焊縫形成的虛焊、氣孔、裂紋等缺陷.

2) Clean up the oil stain on the surface before welding, and reduce the defects of virtual welding, pore and crack.

3)焊接完后將所有可見焊縫打磨光滑,與周圍表面一樣平滑,無明顯劃痕.

3) After welding, all visible welds are polished smooth, as smooth as the surrounding surface, without obvious scratches.

完工外觀要求:安裝完成后標牌外觀精美,表面無螺釘,無劃痕、氣泡及明顯的顏色不均勻,烤漆須無明顯色差,所用材料符合設計方案要求.

Finished Appearance Requirements: After installation, the label has exquisite appearance, no screw on the surface, no scratches, no bubbles and obvious uneven color, no obvious color difference in the paint, and the materials used meet the design requirements.http://www.youkufilm.com/